|
DS-700 Disk Duplicator - Intelligent, high performance Enhanced (EIDE) and SCSI disk duplication system - Cost effective solution for system integrators and custom disk copying - IDE Duplication Mode - Copies dissimilar IDE drives - Intelligent copy mode for managing and copying from a master to two target disk drives simultaneously - Partitions and formats new drives during duplication process - Fast transfer speeds of up to 1 MB/Sec. - Loads 150-200 drives in an eight hour shift - SCSI Duplication Mode - Duplicates media from SCSI source to up to six target drives or tapes - Byte-by-byte copying of selected block ranges or entire disks - with automatic error detection - Fast and wide (16-bit) SCSI operations - Can low-level format drives to factory-new condition Greystone Peripherals now offers the affordable Tomahawk DS-700 Disk Duplicator solution for the mixed-volume system integrator business. Ideal for small volume applications, the Tomahawk is the long wished for dual mode duplication system which enables you to duplicate both SCSI and IDE hard drives as needed. The IDE duplication mode enables you to selectively copy program software and data from one IDE master source drive to two target IDE hard disk drives, simultaneously, as fast as the IDE interface allows. The duplication process, including formatting and verification, operates at less than 3 seconds per megabyte. If 100 megabytes were to be duplicated to two 1.6 GB disk drives simultaneously, duplication time would be less than 5 minutes for both drives! The SCSI duplication mode enables you to selectively copy media from one source SCSI drive to up to six SCSI target drives. Copying is done on a byte-by-byte basis so the copy is an exact duplicate of the original, guaranteeing data integrity. It will copy disk to disks, tape to tapes. User selectable options allow the data to be verified after it is written and errors to be logged to a disk file. Utility commands allow the block size of disk drives to be changed, and the drives to be low-level formatted to a factory-new condition. The Tomahawk software provides easy to use menu-driven screens for setting
up the source/target devices for duplication. Options such as specifying
the range of blocks to be copied for partial disk copying, whether to 'write
and verify" data, logging of errors to a disk file, changing the block
size of disk drives and low-level formatting are available for custom control
of your copying needs. The Tomahawk is compatible with DOS, Windows 95
and NT, OS/2, Mac OS and UNIX operating systems. Configurations
|
