SanDisk CompactFlash Specification
Interface - PCMCIA PC Card ATA and True IDE Mode
System Performance (Notes 1 & 2)
| Start-up Time |
| Sleep to Write |
2.5 msec max. |
| Sleep to Read |
2.0 msec max. |
| Reset to Ready |
50 msec typical, 400 msec max. |
| Data Transfer Rate to/from Flash |
4.0 MB/sec burst |
| Data Transfer Rate to/from Host |
6.0 MB/sec burst |
| Delay Active to Sleep |
Programmable |
| Controller Overhead Command to DRQ |
<1.25 msec |
| Power Requirements (Note1) |
| DC Input Voltage |
| Commercial |
5V ± 10%, 3.3V ± 5% |
| Industrial |
5V ± 5% |
| Typical Power Dissipation (Notes 3 & 4) |
| Sleep |
200µA (3.3V) 500µA (5V) |
| Read |
32-45 mA (3.3V) 46-75 mA (5V) |
| Write |
32-60 mA (3.3V) 46-90 mA (5V) |
| Environmental Specifications |
| Temperature |
| Operating Commercial |
0 - 60º C |
| Operating Industrial |
-40 - 85º C |
| Non-Operating Commercial |
-25 - 85º C |
| Non-Operating Industrial |
-50 - 100º C |
| Humidity |
| Operating |
8 - 95%, non-condensing |
| Non-Operating |
8 - 95%, non-condensing |
| Acoustic Noise (at 1 meter) |
0 dB |
| Vibration |
| Operating |
15 G peak to peak max. |
| Non-Operating |
15 G peak to peak max. |
| Shock |
| Operating |
2000 G. Max. |
| Non-Operating |
2000 G. Max. |
| Reliability and Maintenance |
| MTBF (Mean Time Between Failures) |
1,000,000 hours |
| Preventive Maintenance |
None |
| Data Reliability |
<1 non-recoverable error in 1014
bits read |
| Physical Specifications |
CompactFlash |
CFAdapter |
| Length |
1.433 in (36.4 mm) |
3.370 in (85.6 mm) |
| Width |
1.685 in (42.8 mm) |
2.126 in (54.0 mm) |
| Thickness (Body) |
0.130 in (3.30 mm) |
0.1968 in (5.0 mm) |
| Thickness (Removable Edge) |
0.155 in (93.94 mm) |
N/A |
| Weight |
0.40 oz (11.4 g) |
1.16 oz (33 g) |
| Ordering Information |
| Order Model # |
SDCFBX-YY-ZZZ CompactFlash
SDCF-03 CFAdapter (See Note 5) |
| WhereX: |
1 Industrial temp. grade |
|
Standard temp. grade |
| YY: |
2: 2.0 MB
4: 4.0 MB
10: 10.4 MB
15: 15.0 MB
20: 20.0 MB
24: 24.0 MB
|
| ZZZ: |
101 Standard |
|
|
Note 1: All values quoted are typical at ambient temperature
and nominal supply voltage unless otherwise stated.
Note 2: All performance timing assumes the controller
is in the default (i.e., fastest) mode.
Note 3: Sleep mode currently is specified under the condition
that all card inputs are static CMOS levels and in a "Not Busy"
operating state.
Note 4: The currents specified show the bounds of programmability
of the product.
Note 5: CF interface surface mount header and ejector
may be ordered from 3M Company. To order, call: .
Specifications are subject to change without notice.
|