Specification
5 1/4 full height form factor fits into the standard storage slot of
most system configurations. A unique push cartridge transport system
within the autoloader eliminates the mis-grip issues conventional cartridge
picking systems encounter
High storage capacity of 200 Gigabytes (compressed)* provides 4 times
the unattended data storage of a single AIT drive
Memory-In-Cassette (MIC) reader embedded in the elevator provides swift
access to the data location promoting ultra fast file search, easy data
management, and rapid media load
Drive Type
3.5" 8mm tape drive
Media
170 meter Advanced-Metal Evaporated (AME) tape:
SDX-T3N (without MIC)
SDX-T3C (with MIC)
Interface
SCSI-2 Fast/Wide, Single-Ended
Capacity (170 M AIT Tape)
100 GB (native)
200 GB (compressed)*
Sustained Transfer Rate
3 MB/s (native)
6 MB/s (compressed)*
Burst Transfer Rate
Asynchronous: 12.0 MB/s
Synchronous: 20.0 MB/s
Average Access Time
Cartridge Orientation: 75 seconds (typical)
Cartridge Swap: 55 seconds (SCSI) with MIC (typical)
Reliability*
MSBF: 200,000 cycles
MTBF: 185,000 hours
MTTR: 30 minutes
Vibration (operating)
Operating: 5-500 Hz, 0.25 G
Non-Operating: 5-500 Hz, 0.5 G
Acoustic Noise
Streaming Write/Read: 35 dB(A)
Cartridge Change: 70 dB(A)
Electrostatic Discharge
20 kV with no unrecovered errors
Shock (operating)
Operating: 5.0 G peak half sign wave of 3 ms duration
Non-Operating: 90 G peak half sign wave of 3 ms duration
Altitude
10,000 feet
Operating Temperature
Operating, internal: 41F to 104F (5C to 40C)
Operating, external: 41F to 95F (5C to 35C)
Storage: -35F to 133F (-40C to 60C)
Relative Humidity
Operating: 20-80% (non-condensing)
Storage: 10-90% (non-condensing)
Maximum wet bulb temperature: 26 C
Power Requirement
DC 5V +/- 5%, DC 12V +/- 10% (internal)
AC 100-200/220-240V Auto-ranging (external)
Power Consumption
14 watts (average, internal)
24 watts (average, external)
Dimensions
5.75" W x 3.25" H x 9" D (146 x 82.5 x 228.6 mm) -internal,
excluding front panel
8.31" W x 4.29" H x 11.65" D (211 x 109 x 297 mm) -external
Weight
5 lb 8 oz (2.5 kg) without magazine, 6 lb 9 oz (3 kg) with magazine
and 4 media cartridges -internal
11 lb (5 kg) without magazine, 12 lb 2 oz (5.5 kg) with magazine and
4 media cartridges -external
Magazine Type
4 cartridge magazine
Magazine Dimensions
4.09" W x 1.44" H x 5.18" D (104 x 36.5 x 131.5 mm)
Autoloader Certifications
UL, CSA, TUV, CE Mark (internal & external)
FCC Class B, cTick, VCCI Class 2 (external)
Models
TSL-A300C (Internal Single Ended Non-branded)
TSL-SA300C/NB (External Single Ended Non-branded)
*Specifications reflect 2:1 data compression. MSBF, MTBF, MTTR, head
life and media use specifications are averages based on normal office environmental
conditions. Actual experience may vary.
Specifications subject to change without notice.
Nonmetric weights and measurements are approximate.
|
|
|
All of the reliability, performance, and capacity
you have come to expect from your Sony Advanced Intelligent Tape (AIT)
drive is now quadrupled. Sony's 4 cartridge AIT autoloader is an ideal
extension of Sony's AIT family and is ready to handle your demanding unattended
backup needs of 100 Gigabytes and more.
The TSL-A300C combines a 4 AME cartridge magazine along with Sony's
SDX-300C AIT drive to deliver a data transfer rate up to 6 Megabytes per
second*. With a 200 Gigabyte capacity magazine*, the TSL-A300C provides
an immediate solution for the storage needs of large network, workstation,
and server environments.
|