Wytron

MagicJumBO Stand-alone Hard Disk Drive Duplicator Products:

EIDE/IDE Hard Drive Duplicator | SCSI Hard Drive Duplicator

EIDE/IDE 1/5/11-Target Stand-alone Hard Disk Drive Duplicator

DD-121 for Single target, $1,250 ( P/N: Wyt-DD121 )

DD-1000 for 5-target, $3,750 ( P/N: Wyt-DD1000 )

DD-3000 for 11-target, $5,150 ( P/N: Wyt-DD3000 )

DD-121 Wytron MagicJumBO IDE HDD Duplicator ( P/N: Wyt-DD121 )

PRODUCT INFORMATION

1. Single-target stand-alone IDE-bus hard drive duplicator available for many known systems and formats, such as Windows NT, Windows 95 (FAT16 or FAT32), MS-DOS, IBM OS/2 Warp, NEC, Unix/Xenix, Novell Netware, etc., compact design and easy to operate.
2. The Quantum bigfoot 5.25" hard drive, desktop 3.5" hard drive and notebook-size 2.5" hard drive duplicating capability are all supported.
3. Maximum bus transfer rate up to 220MB/min (tested on Quantum Fireball 1.2GB HDD) but the speed will vary on different HDDs.
4. Module design for operation: Quick copy, Full copy and compare function can be selected according to user's requirement from front panel button.
5. LBA spec. compliances to break 528MB DOS limitation.
6. Capability of duplicating non-DOS partition and multi-partition.
7. For FAT system, different hard drive either in capacity, brand or model can be duplicated for data.
8. PIO mode supported for Mode 0, 1, 2, 3, 4 or auto-identify. Latest spec. can be upgraded easily.
9. Specification:

• Display device: 16x1 LCD display.
• Power supply: 45W
• AC input: Auto-switch
• Net size: 210 x 120 x 80 mm
• Packing size: 310 x 190 x 140 mm
• Net weight: 1.5 kgs
• Gross weight: 2 kgs
• Standard accessory:
• Power cord 1 piece
• Operation manual 1 set
• 3.5" to 2.5" converter 2 pieces
• Hard drive control cable 2 pieces
• Hard drive power cable 1 piece

( The picture of DD-1000 is not ready yet, but will be similar to the above )

Product Information | Product Specification

Product Info for DD-1000:

1. Five-target stand-alone IDE-bus hard drive duplicator available for many known systems and formats, such as Windows NT, Windows 95 (FAT or FAT32), MS-DOS, IBM OS/2 Warp, NEC, Unix/Xenix, Novell Netware, etc., compact design and easy to operate.
2. The Quantum bigfoot 5.25" hard drive, desktop 3.5" hard drive and notebook-size 2.5" hard drive duplicating capability are all supported.
3. Power control: Power outputs during operation only. A save envirement for install and un-install the HDDs with machine. Resetable fuse design offers a best protection on HDD.
4. Maximum bus transfer rate up to 280MB/min (tested on Quantum Fireball 1.2GB HDD) but the speed will vary on different HDDs.
5. Concurrent copy process for each hard drive. Module design for operation: Quick copy, Full copy, Compare and even the diagnostic function can be selected according to user's requirement.
6. LBA spec. compliances to break 528MB DOS limitation.
7. Capability of duplicating non-DOS partition and multi-partition.
8. For FAT or NTFS system, different hard drives either in capacity, brand or model can be duplicated for data simultaneously.
9. PIO mode supported for Mode 0, 1, 2, 3, 4 or auto-identify. Latest spec. can be upgraded easily.
10. Information of duplication can be monitored on PC through the RS-232C connection.
11. Specification:

• Display device: 20 x 2 LCD display.
• Power supply: 300W
• AC input: 115V/230V, 50Hz/60Hz switchable
• Net size: 330 x 210 x 440 mm
• Packing size: 565 x 335 x 480 mm
• Net weight: 15 kgs
• Gross weight: 18 kgs
• Standard accessory:
• Power cord 1 piece
• Operation manual 1 set
• HDD flat control cable 9 pieces
• HDD power supply cable 9 pieces
• Notebook 3.5" to 2.5" 12 pieces

Product Specification for CM-1000:

DD-3000 Wytron MagicJumBO IDE HDD Duplicator ( P/N: Wyt-DD3000 )

PRODUCT INFORMATION

1. Eleven-target stand-alone IDE-bus hard drive duplicator available for many known systems and formats, such as Windows NT, Windows 95 (FAT16 or FAT32), MS-DOS, IBM OS/2 Warp, NEC, Unix/Xenix, Novell Netware, etc., compact design and easy to operate.
2. The Quantum bigfoot 5.25" hard drive, desktop 3.5" hard drive and notebook-size 2.5" hard drive duplicating capability are all supported.
3. Power control: Power outputs during operation only. A save envirement for install and un-install the HDDs with machine. Resetable fuse design offers a best protection on HDD.
4. Maximum bus transfer rate up to 280MB/min (tested on Quantum Fireball 1.2GB HDD) but the speed will vary on different HDDs.
5. Concurrent copy process for each target hard drive. Module design for operation: Quick copy, Full Copy, Compare and even the diagnostic function can be selected according to user's requirement.
6. LBA spec. compliances to break 528MB DOS limitation.
7. Capability of duplicating non-DOS partition and multi-partition.
8. For FAT or NTFS system, different hard drives either in capacity, brand or model can be duplicated for data simultaneously.
9. PIO mode supported for Mode 0, 1, 2, 3, 4 or auto-identify. Latest spec. can be upgraded easily.
10. Information of duplication can be monitored on PC through the RS-232C connection.
11. Specification:

• Display device: 20 x 2 LCD display.
• Power supply: 300W
• AC input: 115V/230V, 50Hz/60Hz switchable
• Net size: 500 x 420 x 130 mm
• Packing size: 640 x 560 x 270 mm
• Net weight: 9 kgs
• Gross weight: 11 kgs
• Standard accessory:

• Power cord 1 piece
• Operation manual 1 set
• HDD flat control cable 24 pieces
• HDD power supply cable 24 pieces
• Control box and data cable 1 set
• Notebook 3.5" to 2.5" 24 pieces

SCSI Stand-alone single or 5-target Hard Disk Drive Duplicator

DD-121S single target, $1,850 ( P/N: Wyt-DD121S )

CM-1000/SCSI 5-target, $4,350 ( P/N: Wyt-CM1000S)

DD-121S Wytron MagicJumBO SCSI HDD Duplicator ( P/N: Wyt-DD121S )

PRODUCT INFORMATION

1. Single-target stand-alone single-ended SCSI-bus hard drive duplicator available for many known systems and formats, such as Windows NT, Windows 95 (FAT16 or FAT32), MS-DOS, IBM OS/2 Warp, NEC, Unix/Xenix, Novell Netware, etc., compact design and easy to operate.
2. Support up to ultra SCSI specification (SCSI-I, SCSI-II and SCSI-III) which can reach 20 MB/sec. maximum bus transfer rate but the speed will vary on different HDDs.
3. Module design for operation: Quick copy, full copy and compare functions can be selected according to user's requirement from front panel button.
4. Capability of duplicating multi-partition configuration .
5. Handle different hard drive simultaneously either in capacity, brand or model.
6. Handle either narrow or wide SCSI hard drive. (Wide SCSI need optional 50-68 pins adapter)
7. Specification:

• Display device: 16x1 LCD display.
• Power supply: 45W
• AC input: Auto-switch
• Net size: 210 x 120 x 80 mm
• Packing size: 310 x 190 x 140 mm
• Net weight: 1.5 kgs
• Gross weight: 2 kgs
• Standard accessory:

• Power cord 1 piece
• Operation manual 1 set
• SCSI hard drive control cable 2 pcs
• Hard drive power cable 2 pcs

CM-1000/SCSI Wytron MagicJumBO SCSI HDD Duplicator ( P/N: Wyt-CM1000S )

Product Information | Product Specification

Product Information for CM-1000/SCSI:

1. Five-target stand-alone single-ended SCSI-bus hard drive duplicator available for many known systems and formats, such as Windows NT, Windows 95 (FAT16 or FAT32), MS-DOS, IBM OS/2 Warp, NEC, Unix/Xenix, Novell Netware, etc., compact design and easy to operate.
2. Support up to ultra SCSI specification (SCSI-I, SCSI-II and SCSI-III) which can reach 20 MB/sec. maximum bus transfer rate but the speed will vary on different HDDs.
3. Module design for operation: Quick copy, full copy and compare functions can be selected according to user's requirement from front panel button.
4. Capability of duplicating multi-partition configuration .
5. Handle different hard drive simultaneously either in capacity, brand or model.
6. Handle either narrow or wide SCSI hard drive. (Wide SCSI need optional 50-68 pins adapter)
7. Specification:

• Display device: 20 x 2 LCD display.
• Power supply: 300W
• AC input: 115V/230V, 50Hz/60Hz switchable
• Net size: 330 x 210 x 440 mm
• Packing size: 565 x 335 x 480 mm
• Net weight: 15 kgs
• Gross weight: 18 kgs
• Standard accessory:
• Power cord 1 piece
• Operation manual 1 set
• HDD flat SCSI control cable 9 pieces
• HDD power supply cable 9 pieces

Product Specification for CM-1000/SCSI: